Professional Flooring Solutions

F-Ball Products

F3

 F-Ball F3 15 litre

F3 is a water based rubber/resin flooring adhesive that has excellent wet grab with an early build up of strength. F3 can be used for securing fibre bonded carpets, hessian, felt, secondary latex and rubber foam backed carpets and cork tiles up to 3.2mm thick. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations. F3 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.

POA + VAT

F44

F-Ball F44 15 litre

F Ball F44 vinyl flooring adhesive. The best known vinyl flooring adhesive on the market. F44 is a solvent free - low odour - acrylic emulsion adhesive which is designed to give a high bond strength, strong initial tack and a long open time. It is protected against biodegradation and is suitable for use over underfloor heating installations. Great for vinyl flooring but use our F3 for carpets or our F41 for carpet tiles. To minimise the effect of adhesive shadowing through the vinyl floorcovering, the adhesive can be trowel applied and flattened with a paint roller. The ‘double drop’ technique can also be used to reduce the drying time

POA + VAT

F46

F-Ball F46 15 litres

F46 vinyl adhesive. Reliable, professional adhesive by the flooring industry's leading manufacturer. Ideal for flooring installations such as Karndean, Polyflor and Amtico when using an A2 trowel blade. Pressure sensitive. Size: 5ltr (also available in 15ltr).

POA + VAT

F41 5Ltr

F-Ball f41 5 litres

F41 is a solvent free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents 'looselay' carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques. STYCCOBOND F41 can be used for securing a wide range of dimensionally stable "lay flat" carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings. See the Recommended Adhesives Guide for details of specific floorcoverings. STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOlATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, linoleum and Vinyl floorcoverings. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

POA + VAT

F41 25Ltr

F-Ball f41 25 litres

F41 is a solvent free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents 'looselay' carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques. STYCCOBOND F41 can be used for securing a wide range of dimensionally stable "lay flat" carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings. See the Recommended Adhesives Guide for details of specific floorcoverings. STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOlATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, linoleum and Vinyl floorcoverings. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

POA + VAT